Make your own free website on Tripod.com

Startup state of Linux/i386 ELF binary

Copyright (C) 1999-2000 by Konstantin Boldyshev

(primary url for this document is http://linuxassembly.org/startup.html)

All information provided here derived from my own research. So, mistakes and some incompleteness could exist.
If you find any - please contact me.


Contents


1. Introduction

Objective of this document is to describe some startup process details and initial state of stack & registers of ELF binary program, for Linux Kernel 2.2.x and 2.0.x on i386.

Portions of material represented here may be applicable to any ELF/i386 system (FreeBSD, NetBSD, BeOS, etc).

Please note that in general case you can apply this information only to plain assembly programs (gas/nasm); some things described here (stack/registers state) are not true for anything compiled/linked with gcc (C as well as assembly) -- gcc inserts its own startup code that is executed before control is passed to main() function.

Main source and authority of information provided below is Linux Kernel fs/binfmt_elf.c file.
If you want all details of the startup process - go read it.

All assembly code examples use nasm syntax.

You can download program suite that was used while writing this document at Linux Assembly (binaries, source).

2. Overview

Every program is executed by means of sys_execve() system call; usually one just types program name at the shell prompt. In fact a lot of interesting things happen after you press enter. Shortly, startup process of ELF binary can be represented by following step by step picture:

FunctionKernel fileComments
shell...on user side one types in program name and strikes enter
execve()...shell calls libc function
sys_execve()...libc calls kernel...
sys_execve()arch/i386/kernel/process.carrive to kernel side
do_execve()fs/exec.copen file and do some preparation
search_binary_handler()fs/exec.cfind out type of executable
load_elf_binary()fs/binfmt_elf.cload ELF (and needed libraries) and create user segment
start_thread()include/asm-i386/processor.hand finally pass control to program code

Figure 1. Startup process of ELF binary.

Layout of segment created for ELF binary shortly can be represented by Figure 2. Yellow parts represent correspondent program sections. Shared libraries are not shown here; their layout duplicates layout of program, except that they reside in earlier addresses.

0x08048000
code.text section
data.data section
bss.bss section
...
...
...
free space
stackstack (described later)
argumentsprogram arguments
environmentprogram environment
program namefilename of program (duplicated in arguments section)
null (dword)final dword of zero
0xBFFFFFFF

Figure 2. Segment layout of ELF binary.

Program takes at least two pages of memory (1 page = 4 KB), even if it consists of single sys_exit(); at least one page for ELF data (yellow color), and one for stack, arguments, and environment. Stack is growing to meet bss; also you can use memory beyond bss (.bss section) for dynamic data allocation (f.e. libc malloc() function does so).

Note: this information was gathered from fs/binfmt_elf.c, include/linux/sched.h (task_struct.addr_limit), and core dumps investigated with ultimate binary viewer biew).

3. Stack layout

Initial stack layout is very important, because it provides access to command line and environment of a program.
Here is a picture of what is on the stack when program is launched:

argc[dword] argument counter (integer)
argv[0][dword] program name (pointer)
argv[1]

...

argv[argc-1]

[dword] program args (pointers)
NULL[dword] end of args (integer)
env[0]

env[1]

...

env[n]

[dword] environment variables (pointers)
NULL[dword] end of environment (integer)

Figure 3. Stack layout of ELF binary.

Here is piece of source from kernel that proves this:

fs/binfmt_elf.c create_elf_tables()

	...

	put_user((unsigned long) argc, --sp);
	current->mm->arg_start = (unsigned long) p;
	while (argc-- > 0) {
		put_user(p, argv++);
		while (get_user(p++))	/* nothing */
			;
	}
	put_user(0, argv);
	current->mm->arg_end = current->mm->env_start = (unsigned long) p;
	while (envc-- > 0) {
		put_user(p, envp++);
		while (get_user(p++))	/* nothing */
			;
	}
	put_user(0, envp);

	...

So, if you want to get arguments and environment -- you just need to pop then one by one; argc and argv[0] are always present. Here's sample code (it is quite useless, just shows how to do it):

	pop	eax	;get argument counter
	pop	ebx	;get our name (argv[0])
.arg:
	pop	ecx	;pop all arguments
	test	ecx,ecx
	jnz	.arg
.env:			;pop all environment vars
	pop	edx
	test	edx,edx
	jnz	.env

In fact you can also access arguments and environment in a different way -- directly. This method is based on structure of the user segment of loaded ELF binary: arguments and environment lay consequently at the end of segment (Figure 2). So, you can fetch address of first argument from the stack, and then just use it as start address. Arguments and environment variables are null-terminated strings; you need to know who is who, so you have to evaluate start and end of arguments and environment:

	pop	eax				;get argument counter
	pop	esi				;start of arguments
	mov	edi,[esp+eax*4]			;end of arguments
	mov	ebp,[esp+(eax+1)*4]		;start of environment

Second way seems to be more complex, you have to distinguish arguments manually. However it can be more suitable in some cases. Program name also can be fetched by downstepping from 0xBFFFFFFB (0xBFFFFFF-4) address (Figure 2).

4. Registers

Or better to say, general registers. Here things go different for Linux 2.0 and Linux 2.2. First I'll describe Linux Kernel 2.0.

4.1 Linux Kernel 2.0

Theoretically, all registers except EDX are undefined on program startup when using Linux 2.0. EDX is zeroed by ELF_PLAT_INIT in fs/binfmt_elf.c create_elf_tables(). Here is definition of this macro:

include/asm-i386/elf.h

	...

	/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program
	   starts %edx contains a pointer to a function which might be
	   registered using `atexit'.  This provides a mean for the
	   dynamic linker to call DT_FINI functions for shared libraries
	   that have been loaded before the code runs.

	   A value of 0 tells we have no such handler.  */
#define ELF_PLAT_INIT(_r)	_r->edx = 0

	...

Practically, simple investigation shows that other registers have well defined values. Here we go...

If you will be patient enough and follow the path shown on Figure 1, you'll find out that pt_regs structure (that contains register values before system call) is downpassed to load_elf_binary() and create_elf_tables() in fs/binfmt_elf.c COMPLETELY UNCHANGED (I will not cover this chain and appropriate kernel sources here to save space, but do not take my words, go check it :). The only modification is done right before passing control to program code, and was shown above -- EDX is zeroed (note: final start_thread() sets only segment & stack registers. Also EAX is always zero too, though I haven't found corresponding kernel source). This means that values of most general registers (EBX,ECX,ESI,EDI,EBP) on program startup are the same as in caller program before sys_execve()! More to say: one can pass to program any custom values he wants in ESI, EDI and EBP (certainly by means of direct syscall, not libc execve() function), and called program will receive them (sys_execve() call needs only EBX (program name), ECX (arguments) and EDX (environment) to be set). Conclusion: program gets photo of registers state before sys_execve(). You can use this to hack libc :)

I wrote two simple programs to illustrate state of registers - execve and regs. regs shows registers state on startup, execve executes given program and shows registers before sys_execve() call. You can easily combine them - try running

$ ./execve ./regs

on Linux 2.0 and you will get the picture of what I'm talking about.

Linux Kernel 2.2

On Linux 2.2 things are much simpler and less interesting -- all general register are zeroed by ELF_PLAT_INIT in create_elf_tables(), because ELF_PLAT_INIT is not the same as in Linux 2.0:

include/asm-i386/elf.h

#define ELF_PLAT_INIT(_r)	do { \
	_r->ebx = 0; _r->ecx = 0; _r->edx = 0; \
	_r->esi = 0; _r->edi = 0; _r->ebp = 0; \
	_r->eax = 0; \
} while (0)

Finally, as visual illustration of this difference, here is partial output of regs program both for Linux 2.0 and Linux 2.2:

Linux 2.0 (kernel 2.0.37)

EAX	:	0x0
EBX	:	0x80A1928
ECX	:	0x80A1958
EDX	:	0x0
ESI	:	0x0
EDI	:	0x8049E90
EBP	:	0xBFFFFBC4
ESP	:	0xBFFFFE14
EFLAGS	:	0x282
CS	:	0x23
DS	:	0x2B
ES	:	0x2B
FS	:	0x2B
GS	:	0x2B
SS	:	0x2B

Linux 2.2 (kernel 2.2.10)

EAX	:	0x0
EBX	:	0x0
ECX	:	0x0
EDX	:	0x0
ESI	:	0x0
EDI	:	0x0
EBP	:	0x0
ESP	:	0xBFFFFB40
EFLAGS	:	0x292
CS	:	0x23
DS	:	0x2B
ES	:	0x2B
FS	:	0x0
GS	:	0x0
SS	:	0x2B

In fact you can use this difference to determine quickly what kernel you are running under -- just check whether EBX or ECX are zeroes on startup:

	test	ebx,ebx
	jz	.kernel22	;it is Linux 2.2
.kernel20:			;otherwise it is Linux 2.0
	...

.kernel22:
	...

Also, you probably noticed from regs output that FS and GS are not used in Linux 2.2; and they are no longer present in pt_regs structure..

5. Other info

fs/binfmt_elf.c also contains padzero() function that zeroes out .bss section of a program; so, every variable contained in .bss section will get value of 0. Once again, you can be sure that uninitialized data will not contain garbage. You can use this issue if you want to initialize any variable(s) with zero -- Linux will do it for you, just place them in .bss section.

6. Summary

Brief summary of things to know about ELF binary startup state:

7. Contact

Author: Konstantin Boldyshev <konst@linuxassembly.org>


$Id: startup.html,v 1.11 2000/02/09 09:10:16 konst Exp $